Bando P10XL037 MPB TB Pulley 3/16" 40mm WideBando P10XL037 The type of pulley used on a Synchro Link drive depends on a number of factors, including but not limited to, space available, ratios, center distances, horsepower being transmitted, speeds and user preference of mounting systems (i. e. QD, TL or Minimum Plain Bore). With Synchro Link Drives, as with gear or chain drives, circular pitch (usually referred to as pitch) is a fundamental consideration. On the belt, pitch is the distance
Amperes 342 A LRC 9
Load 77° C Start Configuration DOL Break-Down Torque 267 LB-FT Pull-Up Torque 120 LB-FT Locked-Rotor Torque 146 LB-FT Starting Current 174 A Rated Load Rated Load 0% 25% 50% 75% 100% 125% 150% S
125 IN Shaft Extension Location Pulley End Shaft Ground Indicator No Shaft Grounding Shaft Rotation Reversible Shaft Slinger Indicator Shaft Slinger Speed 1165 rpm Speed Code Single Speed Motor Standards NEMA Starting Method Direct on line Thermal Device - Bearing None Thermal Device - Winding None Vibration Sensor Indicator No Vibration Sensor Winding Thermal 1 None Winding Thermal 2 None XP Temp Code T3C Drawings
Bando - 400-S8M-2496 HP Anticipating the demand for energy savings and higher horsepower transmission
Bando - CX47 Studies have determined that using Bando Power King® Cog and Power Ace® Cog V-belts can save substantial dollars on energy consumption
00 Performance
53 % Rated voltage 200/400 V Rated current 80
33 % Rated voltage 415 V Rated current 140 A L
67 % Rated voltage 400 V Rated current 530 A L
Model CFDB2-25-4476 Power 4
Frame 444/5TS Output 200 HP (150 kW) Number of Poles 4 Frequency 50 Hz Rated speed 1485 rpm Slip 1
5 MOTOR TYPE FHP OPPOSITE END BEARING BALL SHAFT END BEARING BALL AMBIENT 40 ROTATION REVERSIBLE SHIPPING WEIGHT 18 THERMAL PROTECTION ELECTRONICALLY PROTECTED BREAKDOWN TORQUE UOM OZFT LOCKED ROTOR TORQUE UOM OZFT INSULATION CLASS B FULL LOAD AMPS PRIMARY 6
