WetLink Penetrator For Cable Diameter:WLP-M14-9.5MM-LC (for 9.5 +/- 0.3mm cable diameter)

WetLink Penetrator For Cable Diameter:WLP-M14-9.5MM-LC (for 9.5 +/- 0.3mm cable diameter)The WetLink Penetrator is a compression gland cable penetrator to seal electrical cables as they pass into a device or enclosure. Each set includes a bulkhead, seal, plug, O ring, and nut. Its rated to 950 meter (3,116 feet) water depth when used with officially recommended cables! We recommend the Wetlink Plug Wrench and Wetlink Assembly Block to ease with assembly! The WetLink Penetrator can be installed in seconds and doesnt require any adhesives,

Dome end cap for use on Watertight Enclosure for ROV/AUV (2" Series)

it’s a great propulsor for unmanned surface vessels (USVs) and unmanned underwater vehicles (UUVs)

1 x 6″ Left-Angle Micro USB Cable for Raspberry Pi to Pixhawk

can handle >5000 mating cycles

With a 300m depth rating and no need to calibrate crystal oscillators or manually sync the distance between units (select auto sync) at mission start-up

and long-distance dives

allowing it to be flipped around and reinstalled for easy transportation and locking of the spool

The following is our standard pinout for this connector

Slant range measurement resolution

22 lb 100 g Material 6061 or 6063 Aluminum Finish Type 2 Hard Anodizing

no need for an adapter

Those leads are reconfigurable within the box so that you can quickly use an extra twisted pair from the tether for the Water Linked Analog Locator or any RS485 device